Products » Hydro Power

Harris PM 1 Nozzle Micro Hydro Turbine 017-01030
The Harris Hydroelectric P.M. Pelton micro-hydro turbine is designed for high head (20 to 600 feet), low flow (4 to 250 gpm) sites. Dual-nozzle Pelton systems are recommended for sites with ~31-60 gpm flow rates (depending on flow and dynamic head pressure). In a Pelton system, water is collected upstream from the turbine and channeled in a pipe down to the turbine location. At the turbine, the water passes through a nozzle, where it accelerates, strikes the turbine runner, and turns the alternator. These turbines can need little water flow to run efficiently and produce significant power output; with sufficient dynamic head. Typically, the turbine generates DC electricity -- 12volt, 24volt or 48volt -- which is then stored in a battery bank for future use. An inverter can also be incorporated into the system to convert the DC electricity to standard household AC electricity Harris Hydro Generators come standard with a Permanent Magnet (P.M.) style alternator. The Permanent Magnet alternators produce significantly more power than brush style alternators in marginal sites. Alternator has some end user adjustability to optimize output. The 12 volt models can produce up to 700 watts, 24 volt models can produce up to 1400 watts, and 48 volt models can produce up to 2500 watts of power, depending on site head and flow rates. P.M. brushless alternator should have the optional Fan Kit if output is more than 500 watts.
Harris PM 2 Nozzle Micro Hydro Turbine 017-01032
The Harris Hydroelectric P.M. Pelton micro-hydro turbine is designed for high head (20 to 600 feet), low flow (4 to 250 gpm) sites. Dual-nozzle Pelton systems are recommended for sites with ~31-60 gpm flow rates (depending on flow and dynamic head pressure). In a Pelton system, water is collected upstream from the turbine and channeled in a pipe down to the turbine location. At the turbine, the water passes through a nozzle, where it accelerates, strikes the turbine runner, and turns the alternator. These turbines can need little water flow to run efficiently and produce significant power output; with sufficient dynamic head. Typically, the turbine generates DC electricity -- 12volt, 24volt or 48volt -- which is then stored in a battery bank for future use. An inverter can also be incorporated into the system to convert the DC electricity to standard household AC electricity Harris Hydro Generators come standard with a Permanent Magnet (P.M.) style alternator. The Permanent Magnet alternators produce significantly more power than brush style alternators in marginal sites. Alternator has some end user adjustability to optimize output. The 12 volt models can produce up to 700 watts, 24 volt models can produce up to 1400 watts, and 48 volt models can produce up to 2500 watts of power, depending on site head and flow rates. P.M. brushless alternator should have the optional Fan Kit if output is more than 500 watts.
PPM02-AEE Harris hydroelectric 017-01030
 USD 2,140.00
PPM02-AEE Harris Hydroelectric 017-01032
 USD 2,209.00



Harris PM 4 Nozzle Micro Hydro Turbine 017-01034
The Harris Hydroelectric P.M. Pelton micro-hydro turbine is designed for high head (20 to 600 feet), low flow (4 to 250 gpm) sites. Dual-nozzle Pelton systems are recommended for sites with ~31-60 gpm flow rates (depending on flow and dynamic head pressure). In a Pelton system, water is collected upstream from the turbine and channeled in a pipe down to the turbine location. At the turbine, the water passes through a nozzle, where it accelerates, strikes the turbine runner, and turns the alternator. These turbines can need little water flow to run efficiently and produce significant power output; with sufficient dynamic head. Typically, the turbine generates DC electricity -- 12volt, 24volt or 48volt -- which is then stored in a battery bank for future use. An inverter can also be incorporated into the system to convert the DC electricity to standard household AC electricity Harris Hydro Generators come standard with a Permanent Magnet (P.M.) style alternator. The Permanent Magnet alternators produce significantly more power than brush style alternators in marginal sites. Alternator has some end user adjustability to optimize output. The 12 volt models can produce up to 700 watts, 24 volt models can produce up to 1400 watts, and 48 volt models can produce up to 2500 watts of power, depending on site head and flow rates. P.M. brushless alternator should have the optional Fan Kit if output is more than 500 watts.
HI Power LV 1 Nozzle Micro Hydro Turbine 017-02005
HI-Power is now offering a low-voltage brushless PM (permanent magnet) generator. This user-friendly unit requires no adjustments and is more efficient than car alternator types over a wider range of head and flow. Head range: 40 to 400 feet Flow range: 5 to 400 gpm Maximum power: 1200 watts Efficiency: 30% to 70% Battery voltage options: 12V, 24V, 48V, 96V Available in the four voltages above for direct battery charging. The 48- and 96-volt units allow the use of smaller gauge wire between the generator and the battery. An MPPT charge control, like the OutBack MX-60, can be used to efficiently step the voltage down for charging and regulating 12-, 24- or 48-volt batteries. The sealed permanent magnet alternator is mounted on a Harris housing with the bronze Harris Pelton wheel. The external rectifier is water-cooled and all fasteners are stainless steel. It comes with an induction meter and 3 feet of 1'' flexible hose per nozzle. Order multiple nozzles for convenient adjustment to varying flows. Alternator has 2 sealed 6203 bearings which should be changed every 5-10 years, depending on use. When ordering, specify battery voltage, transmission line length and size, flow, pressure, pipe size and length.
PPM02-AEE Harris Hydroelectric 017-01034
 USD 2,510.00
PPM02-AEE HI Power 017-02005
 USD 1,250.00



HI Power LV 2 Nozzle Micro Hydro Turbine 017-02007
HI-Power is now offering a low-voltage brushless PM (permanent magnet) generator. This user-friendly unit requires no adjustments and is more efficient than car alternator types over a wider range of head and flow. Head range: 40 to 400 feet Flow range: 5 to 400 gpm Maximum power: 1200 watts Efficiency: 30% to 70% Battery voltage options: 12V, 24V, 48V, 96V Available in the four voltages above for direct battery charging. The 48- and 96-volt units allow the use of smaller gauge wire between the generator and the battery. An MPPT charge control, like the OutBack MX-60, can be used to efficiently step the voltage down for charging and regulating 12-, 24- or 48-volt batteries. The sealed permanent magnet alternator is mounted on a Harris housing with the bronze Harris Pelton wheel. The external rectifier is water-cooled and all fasteners are stainless steel. It comes with an induction meter and 3 feet of 1'' flexible hose per nozzle. Order multiple nozzles for convenient adjustment to varying flows. Alternator has 2 sealed 6203 bearings which should be changed every 5-10 years, depending on use. When ordering, specify battery voltage, transmission line length and size, flow, pressure, pipe size and length.
HI Power LV 3 Nozzle Micro Hydro Turbine 017-02009
HI-Power is now offering a low-voltage brushless PM (permanent magnet) generator. This user-friendly unit requires no adjustments and is more efficient than car alternator types over a wider range of head and flow. Head range: 40 to 400 feet Flow range: 5 to 400 gpm Maximum power: 1200 watts Efficiency: 30% to 70% Battery voltage options: 12V, 24V, 48V, 96V Available in the four voltages above for direct battery charging. The 48- and 96-volt units allow the use of smaller gauge wire between the generator and the battery. An MPPT charge control, like the OutBack MX-60, can be used to efficiently step the voltage down for charging and regulating 12-, 24- or 48-volt batteries. The sealed permanent magnet alternator is mounted on a Harris housing with the bronze Harris Pelton wheel. The external rectifier is water-cooled and all fasteners are stainless steel. It comes with an induction meter and 3 feet of 1'' flexible hose per nozzle. Order multiple nozzles for convenient adjustment to varying flows. Alternator has 2 sealed 6203 bearings which should be changed every 5-10 years, depending on use. When ordering, specify battery voltage, transmission line length and size, flow, pressure, pipe size and length.
PPM02-AEE HI power 017-02007
 USD 1,350.00
PPM02-AEE HI Power 017-02009
 USD 1,400.00



HI Power LV 4 Nozzle Micro Hydro Turbine 017-02011
HI-Power is now offering a low-voltage brushless PM (permanent magnet) generator. This user-friendly unit requires no adjustments and is more efficient than car alternator types over a wider range of head and flow. Head range: 40 to 400 feet Flow range: 5 to 400 gpm Maximum power: 1200 watts Efficiency: 30% to 70% Battery voltage options: 12V, 24V, 48V, 96V Available in the four voltages above for direct battery charging. The 48- and 96-volt units allow the use of smaller gauge wire between the generator and the battery. An MPPT charge control, like the OutBack MX-60, can be used to efficiently step the voltage down for charging and regulating 12-, 24- or 48-volt batteries. The sealed permanent magnet alternator is mounted on a Harris housing with the bronze Harris Pelton wheel. The external rectifier is water-cooled and all fasteners are stainless steel. It comes with an induction meter and 3 feet of 1'' flexible hose per nozzle. Order multiple nozzles for convenient adjustment to varying flows. Alternator has 2 sealed 6203 bearings which should be changed every 5-10 years, depending on use. When ordering, specify battery voltage, transmission line length and size, flow, pressure, pipe size and length.
SunPumps SCP pool pumps 47-25-07
These centrifugal pumps are designed specifically for pool water circulation. The SCP series pumps are equipped with heavy duty permanent magnet, DC motors. The pump ends are constructed from high-performance thermoplastic and are extremely resistant to chemicals as well as mineral and algae deposits. For added protection, a basket strainer is incorporated into the suction side of the pump. They can also be used to fill open tanks, aerate ponds, circulate water for aqua culture or irrigate small farms. Inlet and discharge ports are 2" NPT and they operate at 45 to 90 VDC. SCP 42-47-10 operates up to 120 VDC and can pump 93 gpm at 0 psi. Use with SunPumps Control PCB-120 (075-03041). They weigh 34 pounds.
PPM02-AEE HI Power 017-02011
 USD 1,475.00
PPM02-AEE SCP Pool Pump 47-25-07
 USD 1,140.00